drylin® E Motor control system for DC and stepper motors

Teslimat noktanızı seçin

Ülke/bölge sayfasının seçimi, fiyat, nakliye seçenekleri ve ürün mevcudiyeti gibi çeşitli faktörleri etkileyebilir.

Ülke/bölge sayfasının seçimi, fiyat, nakliye seçenekleri ve ürün mevcudiyeti gibi çeşitli faktörleri etkileyebilir.

Sayfalar arasında geçiş yaparken, alışveriş sepetinizdeki ürünlerle ülkenizde bulunan ürünleri eşleştirmeyi deneriz.
Sayfayı değiştirdikten sonra alışveriş sepetinizi kontrol edin, teşekkürler!

The igus® D1 and D2 motor control system can be used for any type of motor. With the exception of the igus® D3 motor control system, all can be operated at 48V. The igus® D3 motor control system works with 24V. The motor control systems D3, D7, D8 and D9 are intended for simple automation directly on the control system and therefore do not require any software and/or PC. The igus® D1 and D2 motor control system also do not require any additional software installation, but are programmed based on web browsers. In this way, settings can be parametrised on the PC but also on the tablet and smart phone. No programming knowledge is required for this. All output stages can also work as slaves, making them versatile.

Kategoriler

Drive technology

Linear modules with lead screw

Linear modules with toothed belt

Linear modules with toothed racks

XY tables

Elektrik motorları

Adımlı motorlar

Doğru akım motorları/DC motorları

EC/BLCD motorları

Linear actuators

Motor dişli kutusu

Motor kontrol sistemleri

Ürün sayısı: 9

Suitable for 28 - 42mm motor flange size (NEMA11-17)
Up to 3A peak current
5-24V control & 24-48V load voltage
Operation mode 1: clock/direction
Operation mode 2: D7 & D7-1: jog mode; D7-2& D7-3: loop mode
Quiet operation & automatic tuning

den 110,66 EUR/Prç.

Sevkıyata hazır ürün sayısı, 4:

2 hafta 3

Ürün sayfasına git

drylin® D8- (X) stepper motor output stage

Product information

Without connecting cable
Set consists of 3x drylin® D8

Can control stepper motors with a continuous current of up to 4A with a supply voltage of up to 48V
Ready to use immediately
Easy control
Exact positioning

den 135,75 EUR/Prç.

Sevkıyata hazır ürün sayısı, 4:

24 saatte 1

2 hafta 3

Ürün sayfasına git

drylin® D2 motor control system for stepper, DC and EC/BLDC motors

A wide range of automation tasks by simple parameterisation, no programming necessary
For single axes, line, flat, linear and room linear robots and delta robots
No software installation or app required
Use with PC, tablet or smart phone
Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff

The drylin® D1 motor control system and the D2 are identical except for the housing.

den 460,44 EUR/Prç.

Sevkıyata hazır ürün sayısı, 1:

2 hafta 1

Ürün sayfasına git

drylin® D9- (X) stepper motor output stage

Suitable for 86mm motor flange size (NEMA34)
Up to 9.8A peak current
5-24V control & 24-48V load voltage
Operation mode 1: clock/direction
Operation mode 2: D7 & D7-1: jog mode; D7-2& D7-3: loop mode
Quiet operation & automatic tuning

den 148,80 EUR/Prç.

Sevkıyata hazır ürün sayısı, 4:

2 hafta 4

Ürün sayfasına git

drylin® D1 motor control system for stepper, DC and EC/BLDC motors

A wide range of automation tasks by simple parameterisation, no programming necessary
For single axes, line, flat, linear and room linear robots and delta robots
No software installation or app required
Use with PC, tablet or smart phone
Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff

TEST BEFORE INVEST - Try out the motor control system with online simulation here before you buy

den 775,94 EUR/Prç.

Sevkıyata hazır ürün sayısı, 1:

24 saatte 1

Ürün sayfasına git

Simple automation directly using the control system without software and/or PC
Operation with limit switch or via power consumption
Left/right operation and speed control directly on the housing
Option for external switches/joysticks
Various modes of operation, such as tip operation and start to finish (semi-automatic)
Various adjustable acceleration ramps
Power supply via 24V/2.5A

All relevant documents for dryve D3 can be found in the downloads.

den 209,66 EUR/Prç.

Ürün sayfasına git